What Is The Bathtub Refinishing Process?

If you are looking into bath refinishing in Washington, D.C., as a means of adding more value to your home or simply creating a more comfortable and appealing space, it is wise to talk to a professional bathtub remodeling service. By allowing professionals to use their equipment and expertise you can ensure that your bath resurfacing will be done properly. Here is a look at the bathtub refinishing process.

Preparation and Sanding

Like most any project, the first step is to prepare for the work ahead . Even though the rest of your bathroom may still be in working order throughout the process of bath refinishing, the procedure itself can get messy; fortunately the proper preparation can keep the mess contained. Use painter’s tape to hang plastic sheets throughout the bathroom in order to protect your sinks, toilets, towels, and other items from the mess. It is also a good idea to set up a fan or other type of ventilation system to facilitate the dissipation of the odor that tends to occur throughout the process. Once these elements are in place, you can begin to remove the old finish and sand down the surface.

Repairing and Primer

Once the old finish has been removed and the surface has been sanded, your bath resurfacing professionals will have the opportunity to analyze the tub and look for weak spots that are chipped or cracked. These weaker areas will be repaired before the new finish is applied. At this point it is time to apply a primer to the newly sanded surface. Once it has dried, bath refinishing coating will be applied layer by layer. Each layer will require some time to dry before a final sealing coat is added.

What Is The Bathtub Refinishing Process? Troubleshooting

There are a few problems that may occur if you hire an inexperienced bath resurfacing service or try to do the job by yourself. In either of these cases your tub may be faded due to improper mixing of the refinishing coating, or you may experience bubbles because air was trapped between layers of coating during the process. It is always a good idea to consult a professional for this type of project.